- Why choose a polypropylene staple fiber [4/13/2021]
- Apopolymer short fiber is long and avoided, and the use is quite wide.Deline short fiber has a texture, low price, dry and cool, warm, non-toxic, high strength, good ball, good wear resistance, good elasticity, good anticore, chemical stability, anti-insection And mold, anti-staining and odor, anti-sun suits, etc.Using many unique excellent properties of polypropylene short fibers, the longness of avoiding weakness, its use is quite extensive, polypropylene short fibers can be used in three aspects such as clothing, decorative, industrial class.Application of polypropylene short fiber clothing: cotton or cotton, polyester blend yarn, mixed with acrylic, mixed with wool, made into a coarse noodle, hygiene, bathrobe, sportswear, mountaineering, blend glove And other products.Application of apopolymer short fiber decoration: crowd non-colored polypropylene pure textile or blended or nonwoven fabric, made into sand release, furniture cloth, car decoration fabric, wall cloth, decorative nonwoven fabric, carpet and other products.Application of apopolymer short fiber industry: Woven fabric and nonwoven fabric, manufactured to human carbon curtains, transport rubber strips, industrial canvas, fishing nets, ropes, various engineering geotextiles and artificial turf bottom cloth , High-performance filter cloth, hot rolling or acupuncture non-woven fabric.......
- What is PP staple fiber [4/6/2021]
- PP short fiber is a kind of fiber, and PP short fibecan improve the crack resistance, impermeability, erosion resistance, frost resistance, explosion resistance and workability of mortar/concrete. Tens of millions of fibers are evenly distributed in the mortar/concrete, playing a very good micro-reinforcement role, so that the integrity of the structure is well maintained, and the structure is prevented from being scattered into many fragments when the structure is damaged by impact. The corrosion of steel bars in the structure can greatly extend the service life of the project and reduce the maintenance cost of the project.......
- What is polypropylene staple fiber? What are the product properties [4/6/2021]
- Polypropylene staple fiber uses polypropylene resin as the main raw material, and undergoes processes such as melt spinning, drawing, crimping, drying, shaping and cutting, and packaging to make colored and colorless, fluffy fibers with a specified denier and length.Polypropylene staple fiber product performance:1. It has excellent moisture conductivity, flexibility, netting and combability, and excellent thermal adhesion.2. High strength, strong curling elasticity, light weight, low melting point, good surface permeability, acid and alkali resistance and abrasion resistance are better than other fibersPolypropylene staple fiber is mainly used in needle-punched carpets, automotive interiors, non-woven fabrics, ropes, decorative materials, medical and sanitary products, and so on.......
- my country's cotton yarn import and export analysis from January to February 2021 [3/30/2021]
- According to customs statistics, my country imported 350,000 tons of cotton yarn from January to February 2021, a year-on-year increase of 24.7%; cotton yarn imports amounted to US$858.8 million, a year-on-year increase of 30.4%; among them, imports of 210,000 tons in January and 140,000 in February Ton. Imports of cotton yarn in the first two months of 2021 are higher than 70,000 tons in the same period in 2019, an increase of 25%. The above data shows that despite the impact of unfavorable factors such as the new crown epidemic, the delayed resumption of production and production of weaving and clothing companies, and the upgrade of epidemic prevention and control, the import of cotton yarn from January to February 2020 is still basically the same as the first two months of 2019. From the perspective of cotton yarn import structure, Vietnam, India, and Pakistan still rank in the top three, but it is worth noting that the gap between India’s cotton yarn imports and Vietnam’s The gap in import volume has gradually widened. The reasons for the strong rebound in 1-2 cotton yarn imports and imports in 2021 include the following points in addition to the low base of imports in the same period in 2020 and the impact on port handling and shipping under the epidemic: First, around the Spring Festival, the quotations of domestic cotton yarns rose rapidly with the sharp rebound of ICE and Zheng Cotton (the increase even exceeded Zheng Cotton), and the price advantages of port bonded, cargo from India, Pakistan and Vietnam appeared; Second, since 2021, affected by the US quantitative easing fiscal stimulus and the Fed’s ultra-loose monetary policy, the appreciation of the renminbi has continued, and the renminbi has appreciated by 0.83% in January;Third, after Biden took office, the import ban on Xinjiang cotton products has not been revoked. Export-oriented enterprises and processing companies are forced to continue to purchase cargo and bonded foreign yarn to replace cotton yarn and cotton textiles containing Xinjiang cotton to avoid being protected by US customs and borders. The risk of temporary detention by the bureau and failure to perform the contract in time;Fourth, orders for domestic weaving, clothing, domestic and foreign trade are relatively smooth around the Spring Festival of 2021, and the production and sales rate is high. The situation for resumption of work and production is very ideal. However, cotton yarn inventories of yarn mills and domestic traders are generally low. In order to meet production and speed up delivery However, downstream enterprises have high enthusiasm for inquiries and purchases of bonded and spot India, Vietnam, and Pakistan yarns.According to the survey, although China’s exports of textile yarns, fabrics and products from January to February 2021 were US$22.134 billion, an increase of 60.8% year-on-year, the performance of cotton yarn exports was relatively inferior (mainly high-count carded cards of 40S and above). , Combed yarn), the export volume of pure polyester yarn was 75,000 tons, a year-on-year increase of 25.1%, and an increase of 20.4% compared with 2019; the export volume of rayon yarn and blended yarn also increased significantly in January and February. The slow export growth has eased the pressure and relieved the siege. (Nonsense)......
- Science and technology help the high-quality development of Xinjiang's cotton industry [3/30/2021]
- On March 25, news from the National Bureau of Statistics stated that the cotton sown area in Xinjiang will be 2501.9 thousand hectares in 2020, a decrease of 1.52% from the 2550.50 thousand hectares in 2019; the cotton production in Xinjiang in 2020 will be 5.162 million tons, compared with 2019. 5.002 million tons increased by 3.20% year-on-year. The cotton planting area in Xinjiang has declined, why is the output still increasing? This benefited from the support of science and technology and other means to promote the high-quality development of Xinjiang cotton. Xinjiang is blessed with natural conditions, with large temperature differences in summer, abundant sunlight, sufficient photosynthesis, and long cotton growth time. Therefore, the quality of Xinjiang long-staple cotton has reached the world's top level, made into clothing, warm, breathable, and comfortable, and the supply has been in short supply for many years. The spring is getting warmer. At the high-standard cotton planting base in Shounut Village, Yaha Town, Kuqa City, several high-horsepower guided unmanned tractors are being sowed with precision. The scene is very spectacular. In recent years, Xinjiang has continuously improved the modernization, intelligence, and information level of agricultural machinery operations, and introduced high-tech technologies such as unmanned tractors to provide farmers with full mechanized technical services for land preparation, planting, plant protection, and harvesting. Many high-tech applications are boosting the high-quality development of Xinjiang's cotton industry."With the deepening of the national cotton price reform, the implementation of the rural revitalization strategy, and the application of high-tech technologies such as unmanned tractors, we are more motivated to grow cotton." This year, Kurban Tohuti, a villager of Shounut Village On the basis of contracting 20,000 mu of land to grow cotton last year, another 10,000 mu was contracted. Plant protection drones, baling cotton pickers, residual film recovery machines, intelligent deep-tipping ploughs... these intelligent machines are favored by more and more Xinjiang cotton farmers. Data shows that the level of agricultural mechanization in Xinjiang has been increasing year by year, and the comprehensive mechanization level of cotton has reached more than 80%. In recent years, the mechanized cotton harvest area in Xinjiang has grown at an average annual rate of over one million mu. From 2016 to 2020, the cotton harvest level will increase from 20.71% to 69.83%. Cotton is one of the local pillar industries. Xinjiang has continuously improved the competitiveness of the cotton industry and promoted the high-quality development of the cotton industry through the use of technology to promote cotton. Last year, in order to stabilize the scale of cotton production, Xinjiang continued to optimize the number of cotton varieties, improve cotton quality, and develop high-yield cotton regions. In order to promote the high-quality development of the cotton industry, the Autonomous Region Science and Technology Department launched the "Cotton High-quality, High-yield and High-efficiency Standardized Production Technology Integration Demonstration Project" last year. This major scientific and technological project invests 31 million yuan to meet the scientific and technological needs of Xinjiang’s high-quality, high-yield, high-efficiency, standardized production of cotton and the safe supply of agricultural water resources. It takes 500,000 mu of high-efficiency and water-saving cotton fields in Shaya County as the research object. "Increase efficiency" as the goal, carry out technological innovation and integrated application, and form a high-quality, high-yield and high-efficiency experience in cotton production that can be replicated and promoted in southern Xinjiang."Last year, the varieties were unified according to the'one main and two auxiliary' seeding model, and the cotton price of 70% of the cotton varieties in our village was also higher than in previous years." Director of Yingak Erik Village Committee, Karatal Town, Aksu City Mehsutti Amizhela said.The “one main and two supplements” model is to promote cotton planting counties and cities in Xinjiang to plant cotton with one main variety and two collocation varieties. At the same time, it encourages the development of one product in one county and one product in multiple counties according to local conditions, effectively solving the problem of multiple and mixed cotton varieties. , The problem of chaos, improve cotton quality from the source.According to reports, this year Xinjiang will speed up the promotion of the "one main and two supplementary" seeding model in the same ecological area to solve the problem of multiple cotton varieties from the source; promote the entire mechanization process of cotton production in the autonomous region, especially in southern Xinjiang, and strive to achieve a mechanized recovery rate of more than 70. %, to promote the green and high-quality development of cotton production in Xinjiang.......
- How does static electricity affect polypropylene staple fiber? [3/30/2021]
- Polypropylene staple fiber is a kind of non-absorbent or very low water absorption, and it cannot be dyed and colored like other synthetic fibers such as polyester and eyeglass. Because of its high static electricity, it is difficult to perform processing such as clearing and spinning, which greatly restricts Based on its application, the high-efficiency, durable, practical antistatic agent and dyeable components were analyzed and screened. Polypropylene staple fiber is because polypropylene is located at the negative end of the fiber frictional charging sequence, so when it rubs with a fiber, It generates a negative charge by itself. This kind of fiber without modification treatment is prone to static electricity accumulation during use, and can cause many troubles in the processing process. Severe static electricity problems will directly affect the cleaning, carding and other processes, and it can't even be used for processing!......
- The use and construction technology of engineering polypropylene fiber [3/30/2021]
- Polypropylene fiber is a high-strength bundled monofilament fiber made with polypropylene as the main raw material and produced by a production process. Adding to concrete or mortar can effectively control the micro-cracks caused by concrete (mortar) solid plastic shrinkage, dry shrinkage, temperature change and other factors, prevent and inhibit the formation and development of cracks, greatly improve the crack resistance and impermeability of concrete, and impact resistance And earthquake resistance, it can be widely used in underground engineering waterproofing, industrial and civil construction engineering roofs, walls, floors, pools, basements, etc., as well as roads and roads and Note: The length range is 3-50mm, and can be produced according to customer requirements.Engineering polypropylene fiber is made of polypropylene through a special process. Commonly used polypropylene engineering fibers can be divided into two forms: monofilament and mesh. Reticulated fiber monofilament fiber Monofilament polypropylene fiber is a kind of high-strength polypropylene bundled monofilament fiber. Special surface treatment technology ensures that the fiber has the best dispersibility in the concrete and the bond strength with the cement body. Generally suitable for fine stone concrete. The appearance of the reticulated polypropylene fiber is that a plurality of fiber monofilaments are interconnected to form a network structure. When polypropylene mesh fibers are put into concrete, in the concrete mixing process, the transverse connection between the fiber monofilaments is destroyed by the rubbing and friction of the concrete itself, forming the fiber monofilament or the net structure to fully expand, thus achieving the quantity The effect of many polypropylene fibers evenly mixed into concrete.The quality of concrete mixed with polypropylene fiber is improved, and the comprehensive performance is improved. It has the characteristics of simple mixing process, low price and excellent performance.1. Anti-cracking: Mixing a certain amount of anti-cracking fiber into mortar/concrete will increase the anti-cracking ability by more than double. It can effectively improve the crack resistance of mortar/concrete caused by temperature stress, plastic shrinkage, dry shrinkage, etc. In the case of reasonable mix ratio and construction specifications, the appearance of cracks can be completely preventedTwo impermeability: can effectively improve and improve the anti-seepage and moisture-proof function of mortar/concrete. In general, adding anti-cracking fiber can improve the impermeability of concrete. It is an effective waterproof material.3. Impact resistance: After infiltrating the anti-cracking fiber, the impact resistance of concrete can be greatly improved.......
- Adding methods of polypropylene fiber in different fields [3/30/2021]
- Polypropylene fiber uses 100% polypropylene as raw material and is processed by a special process to form a high-strength bundle-shaped monofilament organic fiber. It has inherent strong acid resistance, strong alkali resistance, weak thermal conductivity, and extremely stable chemical properties.Polypropylene fiber can be used in different fields of construction engineering. Then, in different fields, the method of adding polypropylene fiber is different!1. Finishing and pressing: A pressing is performed immediately after the concrete is out of the mold, and the second pressing is completed before the initial setting of the concrete is finished. In addition, steel or iron trowels should be used as much as possible when pressing the surface. Because the wooden trowel is not smooth enough, it will pull out the fibers.2. Strength test: the addition of fiber will not affect the strength of concrete, but the strength test of fiber concrete should be carried out on the determined concrete mix according to the regulations before each project is used.3. Description: Fiber is only used as the "secondary reinforcement" of concrete, and its main function is to inhibit the occurrence of concrete cracks, improve the impermeability of the concrete matrix, and extend the service life of concrete, rather than "main structural stress reinforcement." Therefore, the incorporation of fibers cannot change the reinforcement ratio in the original design.Fourth, the feeding order and method: when using, add fiber and aggregates such as sand and stone at the same time, and then wet mix after adding water; it is better to add the fiber in the middle of the sand and stone at the same time as the sand and stone material, the effect is better.5. Forming and curing: Concrete mixed with fibers has no special requirements when forming, but it should be ensured that the concrete is fully vibrated. Concrete mixed with fibers has no special requirements during curing. It can be maintained as normal concrete, and cannot be mixed with fibers. And relax the early curing of concrete.6. Fiber concrete mixing: The mixing time is slightly longer than the mixing time of concrete without fiber by about 30 seconds to ensure that the fibers can be mixed evenly in the concrete.7. Slump adjustment: due to the thickening effect of fiber, the addition of fiber will increase the viscosity of the concrete mixture and slightly reduce the slump. Each project needs a different slump, so the slump should be adjusted through experiments before the project is used. If the slump cannot meet the construction requirements, the water consumption should not be increased to increase the slump, but plasticization should be used appropriately Or water-reducing agent to increase the slump to meet the requirements.......
- Why choose polypropylene staple fiber produced by our Taizhou Hailun Chemical Fiber Company? [3/2/2021]
- Why choose polypropylene staple fiber produced by our Taizhou Hailun Chemical Fiber Company? Because Taizhou Hailun Chemical Fiber Co., Ltd. is a company specializing in the production of polypropylene staple fibers. The company was founded in 1995 and is a technical chemical fiber enterprise specializing in the research, development, production and sales of polypropylene staple fibers. The company has more than 170 employees, covering an area of 54,000 square meters, a factory building of 20,000 square meters, and an office building of 5,500 square meters. The company has 5 advanced fully automatic polypropylene staple fiber production lines with an annual design capacity of 50,000 tons. The company has established a complete polypropylene staple fiber testing laboratory, has a full set of fiber testing instruments, and has the ability to develop new products of polypropylene staple fiber. As a Chinese polypropylene staple fiber manufacturer, the company produces a full range of polypropylene staple fiber products, whose main applications include the automotive industry, civil engineering, liquid filtration, household and textile industries. The company has passed ISO9001: 2015 international quality system certification. Therefore, purchasing polypropylene staple fiber and choosing Hailun chemical fiber is your professional choice.......
- Market summary of China's polypropylene industry [2/23/2021]
- With the continuous and stable growth of China's economy, Chinese polypropylene fiber companies have gradually increased their research and development efforts on differentiated polypropylene fibers, and strive to explore the application fields of polypropylene fibers. At the same time, the textile technology of downstream textile enterprises is constantly improving, and the production capacity and production level of upstream raw material polypropylene manufacturers are also constantly improving.According to data from the National Bureau of Statistics and China Chemical Fiber Industry Association, in 2017, 2018 and 2019, China's polypropylene production was 294,100 tons, 347,800 tons, and 385,500 tons, respectively, maintaining steady growth.With the improvement of my country's polypropylene fiber research and development capabilities and production technology level, the import volume of polypropylene fiber has remained stable in recent years, while the export volume has continued to increase. According to data from the China Chemical Fiber Industry Association and the Chemical Fiber Blue Book, from 2014 to 2019, the export volume of all polypropylene products increased rapidly, from 30,818.30 tons to 57,998.00 tons year by year.......
- How to buy a sweater that can't afford the ball? [2/23/2021]
- How to buy a ball sweater? The key to not pilling is related to the length of the fiber and the weaving method. The fatigue resistance of the fiber is good, the hair balls are not easy to fall off, and there are many surface hair balls. The fiber is long and the degree of pilling is low. In addition, the thick and hard fiber is not easy to pilling.Pilling of clothes is affected by the characteristics of the fabric and cannot be avoided, but the degree can be controlled. Fine fibers are easier to pilling than thick fibers, and blended fibers are easier to pilling than other fibers. For example, a garment made of chemical fiber, wool, and cotton fiber blends is easier to pilling than a piece of pure wool.Fabrics that are easy to pilling: wool, nylon, polyester, thick wool knitted sweaters, etc.;Fabrics that are not easy to pilling: linen, cotton + polyester, silk, cotton, etc.......
- Read RCEP and China's textile industry in one article [2/2/2021]
- The world's largest free trade zone was bornOn November 15, 2020, the "Regional Comprehensive Economic Partnership Agreement" (RCEP) was officially signed. The 15 member states include the ten ASEAN countries, China, Japan, South Korea, Australia and New Zealand, covering a total population of 2.27 billion and a gross domestic product. A total of 26.2 trillion US dollars and a total export value of 5.2 trillion US dollars, both account for about 30% of the world. After 8 years of negotiation and consultation, the member states of RCEP have jointly promoted the world's largest free trade area from conception to reality. This is not only a landmark and important milestone for East Asia regional cooperation, but also an important engine for global economic growth. After the signing of RCEP, each member country still needs to complete their own domestic approval procedures. The agreement will take effect 60 days after at least six ASEAN member states and three non-ASEAN member states signatories submit relevant documents. As the world’s largest free trade arrangement, after RCEP takes effect, the number of final zero-tariff products in trade in goods will exceed 90%. The overall openness of service trade and investment is significantly higher than the original "10+1" free trade agreement, and high-level Modernization topics such as intellectual property, e-commerce, competition policy, and government procurement. As far as my country’s textile industry is concerned, RCEP will have a far-reaching positive impact on the industry’s expansion of the scale of foreign trade and the deepening of industrial chain supply chain cooperation within the region. China and RCEP member states Close textile and garment trade China has been in close contact with 14 other RCEP member countries in the textile and apparel trade. In terms of exports, ASEAN and Japan are our industry’s third and fourth largest export markets after the European Union and the United States. The total exports accounted for more than 20% of my country’s total annual exports of textiles and clothing (the total exports to the two major markets are approximately 60 billion U.S. dollars); South Korea and Australia, as important global textile and apparel consumer markets, have relatively sufficient purchasing power and are also important destinations for the industry's end product exports. In terms of imports, my country's annual imports of textiles and apparel from ASEAN exceed US$7 billion, accounting for about 30% of the industry's annual imports. ASEAN has become the largest source of my country's imported textiles and apparel. For example, my country imports a large amount of cotton yarn and clothing from Vietnam, and imports cotton knitted clothing from Cambodia. At the same time, Japan and South Korea are also important import sources for my country's functional fabrics, chemical fiber textiles and garments, and textile dyes. In addition, Australia and New Zealand also provide my country with a large amount of high-quality wool and other textile materials. According to China Customs statistics, in 2019, my country’s total textile and apparel import and export trade with other RCEP member states reached US$88.26 billion, accounting for approximately 28.8% of the industry’s total foreign trade that year. Among them, my country exported 76.19 billion US dollars of textiles and clothing to the aforementioned countries, accounting for 27.1% of our industry’s global exports. At the same time, my country imported 12.07 billion US dollars of textiles and clothing from these countries, accounting for 47.4% of the industry's total annual imports. China and Japan established a free trade partnership for the first time Achieve a historic breakthrough Speeding up the implementation of the free trade zone strategy is an important part of my country's new round of opening up. Up to now, my country has signed 19 free trade agreements with 26 countries and regions, including most RCEP member states. Among them, the China-New Zealand Free Trade Agreement took effect in October 2008, the China-ASEAN Free Trade Area was fully established in January 2010, and the China-South Korea and China-Australia Free Trade Agreements both took effect in December 2015. Through the signing of RCEP this time, my country and Japan have established a new free trade partnership. This is the first time that my country has signed a free trade agreement with the world's top ten economies, and it is also a major historic breakthrough for my country in implementing the free trade zone strategy. The scale of Sino-Japanese textile trade is expected to continue to expand Japan is currently the fourth largest export market in our industry. In 2019, my country exported 20.88 billion US dollars of textiles and clothing to Japan, accounting for approximately 7.4% of the industry’s total annual exports; during the same period, China imported 3.25 billion US dollars of textiles and clothing from Japan, accounting for approximately 12.8% of total global imports (the above data is based on the statistics of China Customs ). After the RCEP takes effect, most of the products that the industry originally exported to Japan generally face about 4%-11% of Japanese import tariffs. Except for a small part (masks, bedding filled with textile materials, etc.), the main exports are to Japan. The tariffs on clothing products (such as knitted sweaters, men’s and women’s tops, pants, suits, T-shirts, socks, dresses, etc.) will be reduced to zero within 16 years. Since Japan has signed free trade agreements with ASEAN, Vietnam, Thailand, Indonesia, India and other countries, the textile and apparel products of these countries can enjoy duty-free treatment to Japan. After the implementation of RCEP takes effect, it will help our industry gradually participate in international competition fairly in the Japanese market, reduce the export costs of foreign trade companies, and enhance the international competitive advantage of products. At the same time, the original import tax rate of 5% to 8% for the main categories of products imported by our industry from Japan will basically be reduced to zero in 11, 16 or 21 years. For example, the original 8% tax rate of textile machinery products such as shuttleless air-jet looms and flat weft knitting machines imported from Japan will be reduced to zero within 11 or 16 years after the RCEP takes effect, which will help the industry accelerate industrial innovation and upgrading And improve production efficiency. China-Korea Textile and Apparel Trade The tariff is optimal under the RCEP rules South Korea is an important trading partner of China's textile industry in East Asia, and one of the important export markets of my country's textile and apparel. In 2019, my country's textile and apparel exports to South Korea were 8.99 billion U.S. dollars, accounting for about 3.2% of the total industry exports that year. In the same year, my country imported US$1.502 billion in textiles and apparel from South Korea, accounting for 5.9% of the industry’s total annual imports. As far as South Korea is concerned, my country is also its largest source of textile and apparel imports, accounting for more than 1/3 of South Korea's total annual textile and apparel imports. The China-Korea Bilateral Free Trade Agreement came into effect on December 20, 2015. Various concession rules have been implemented for 5 years, and most textile and apparel products have enjoyed tariff reduction or exemption. The signing of the RCEP has little impact on the existing textile and apparel trade tariffs of the two countries, but there are still some export products with the best tariffs under the RCEP rules. From the list of clothing products with different tax rates under the various agreements listed in the table below, it can be seen that after the implementation of RCEP, my country’s chemical fiber knitted sweaters, men’s and women’s down jackets, women’s jeans, men’s cotton shirts and other products will all be based on the tax rate. The tax rate is halved to 6.5%. After the RCEP takes effect in the future, it will help expand exports of these products to South Korea. RCEP helps deepen the area Textile and apparel industry chain and supply chain cooperation The signing of RCEP is a boost to the international cooperation of the textile industry under the current situation where anti-globalization trends are emerging and the epidemic has hit the global textile industry chain cooperation. The member states of RCEP not only include the most important textile and apparel production bases in the world (China, ASEAN, Japan, South Korea), but also cover many important textile and apparel consumer markets in the world, and actively participate in regional industrial cooperation and construction. The efficient and coordinated textile and garment industry chain in the region adds assistance. After the RCEP takes effect, especially in terms of increasing exports to Japan, it will promote trade and investment interaction between our industry in the Lancang-Mekong countries and establish a more interconnected production capacity cooperation system, which will help accelerate the formation of a new development that promotes the mutual promotion of domestic and international double cycles. pattern.Through RECP, the market access of goods, services, investment and other fields among member states will be further relaxed, and customs procedures and technical standards will be gradually unified. By adopting regional rules of origin, it will promote the free flow of economic factors in the region and strengthen the membership. Cooperation in the division of labor will stimulate the expansion and upgrading of the consumer market in the region, and promote the further development of the industrial chain, supply chain and value chain in the region. RCEP’s cumulative rules of origin are more beneficial to companies The biggest achievement in the field of RCEP trade in goods is the provision of rules for the accumulation of origin in the region. Under the rules of origin in most bilateral free trade agreements in the world, goods entering another free trade partner country B from country A need to meet the value-added standards or production requirements in country A, and the goods are identified as originating from country A to enjoy the benefits of country B. tariff. The RCEP regional accumulation rule means that when goods enter from country A to another free trade partner country B, intermediate products of multiple contracting parties in the agreement can be used to meet the required value-added standards or production requirements, so that country A enjoys B The threshold of national zero tariff can be significantly reduced. A large-scale regional origin accumulation system like RCEP will make it easier for companies to obtain preferential tariffs. At the same time, it will have an impact on the company's procurement of raw materials and parts, industrial chain layout, and foreign investment decisions. After the RCEP takes effect in the future, when importing and exporting products that are included in the tariff reduction schedule and meet the standards of origin, they should actively apply for and issuance of certificates of origin, so as to enjoy tariff preferences and customs clearance convenience in time, and enhance the competitiveness of products in the international market . Part of the data and information source: Ministry of CommerceSource of information: China Textile International Production Capacity Cooperation Enterprise Alliance......